How to Take Off the Film On the Stainless Steel Doors?

We know that in general the protective film on the newly purchased stainless steel door is usually used to protect the door from being scratched during handling. Once the door installed, when is the right time to remove the film and how can we do it easy?

Generally, it is a good idea to remove the film as soon as possible after installation to ensure that it doesn't get damaged or become more difficult to remove over time. However, if the installation process involves a lat of dust or debris, it may be best to leave the film in place until the work is complete to avoid any damage to the surface of the door.

You can follow these steps to remove the film:

1. Locate the edge of the film. Look for a corner or edge where the film is starting to peel or lift.

2. Use your fingernail or a plastic scraper to gently lift the edge of the film.

3. Slowly peel the film back, pulling it away from the surface of the door. Be sure to pull it at a low angle and avoid pulling too hard, as this can cause the film to tear or leave residue on the door.

4. If the film is difficult to remove or has been on the door for an extended period of time, you can use a mild cleaning solution or adhesive remover to help loosen it. Be sure to test the solution on a small, inconspicuous area first to make sure it does not damage the stainless steel.

5. Once the film is fully removed, use a clean, damp cloth to wipe down the surface of the door and remove any remaining residue or cleaning solution.

6. Finally, dry the door with a clean, dry cloth to prevent water spots or streaks from forming.